BUDGET SERIES REVERSE OSMOSIS SYSTEMS 

720 lt / day - 75 m³ / day Stainless steel,
Reverse Osmosis is the membrane filtration process for obtaining pure water, which separates all unwanted minerals from water, applied to waters where conventional treatment systems are insufficient (seawater, water with high conductivity, well waters, etc.). This process continues until osmotic equilibrium is achieved. Reverse osmosis is the reversal of this osmotic flow. Aqualine reverse Osmosis Systems successfully ensures that pure water is obtained as a result of this process. In addition, Aqualine Reverse Osmosis Systems can be produced in different design styles according to customer requests.

STANDARD FEATURES
Membrane vessels FRP or Stainless steel
TFC Spiral wound membranes 2,5 ”and 4” diameter
SS304 stainless steel vertical centrifugal high pressure pump (BT 340-BT1540 devices)
Brass body rotary type high pressure pump (for BT 125/1 -BT 240 devices)
St-37 epoxy painted carbon steel skid
5 Micron precision cartridge filter
Low and high pressure pipes U-PVC / Zonder
Automatic valves solenoid valve
Pressure regulating valve at pump outlet and wastewater line (BT 340 - BT1540 devices)
Low pressure switch
Product water and waste water scratch flow meters
Glycerine manometers
Product water conductivity indicator
RO electronic control card
220 V / 50Hz / 1ph (for BT 125/1 -BT 240 devices)
380 V / 50Hz / 3ph (between BT 340-BT1540)
Antiscalant dosing system not included

INLET WATER LIMITS
Inlet water TDS: 0 - 2,000 ppm
Inlet water pressure: 2 to 5 bar
Inlet water pH range: 6-8
Silica (SiO2) Tolerance: Maximum 25 ppm
Minimum and maximum inlet water temperature (10ºC - 30ºC)
Maximum Iron (Fe) tolerance: 0.05 ppm, if ASC is dosed 0.2 ppm
Hydrogen Sulfide should not be.
There should be no turbidity (NTU <1)
No oil or grease
SDI <5
There should be no microbiological pollution